NSN 5381653

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

4 mounting hole quantity, bracket part name assigned by controlling agency, 0.343 inches nominal mounting hole diameter, 11.750 inches nominal overall length, steel material.

NSN 5340-01-594-5527 Datasheet

(NSN) National Stock Number

5340-01-594-5527

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-594-5527

Requires Demilitarization

Yes

(INC) Item Name Code

38089

Date

Mon, Apr 25, 2011

Material

steel

Mounting Hole Quantity

4

Mounting Hole Diameter

0.343 inches nominal

Overall Length

11.750 inches nominal

Part Name Assigned By Controlling Agency

bracket

Special Features

paint light gray per mil-a-1303

Surface Treatment

phosphate manganese

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0038089

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 5340-01-594-5527?

   The FSCG of the NSN 5340-01-594-5527 is 5340

2. Does NSN 5340-01-594-5527 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-594-5527 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-594-5527 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-594-5527 was assigned to the Federal Catalog?

   It was assigned 15 years ago, on Mon, Apr 25, 2011