NSN 5428571

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

2350-01-458-7318; assualt amphibious vehicle (command) end item identification, steel material, tube clip part name assigned by controlling agency.

NSN 5340-01-577-2693 Datasheet

(NSN) National Stock Number

5340-01-577-2693

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-577-2693

Requires Demilitarization

Yes

(INC) Item Name Code

02385

Date

Tue, Sep 1, 2009

End Item Identification

2350-01-458-7318; assualt amphibious vehicle (command)

Material

steel

Part Name Assigned By Controlling Agency

tube clip

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002385

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49780

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094220

Questions & Answers

1. What is the FSCG of the NSN 5340-01-577-2693?

   The FSCG of the NSN 5340-01-577-2693 is 5340

2. Does NSN 5340-01-577-2693 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-577-2693 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-577-2693 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-577-2693 was assigned to the Federal Catalog?

   It was assigned 17 years ago, on Tue, Sep 1, 2009