NSN 55-101140-341

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

50.0 or 60.0 frequency in hertz, plastic case material, encased inclosure type, 3.781 inches maximum overall height, single phase.

NSN 6685-01-248-0946 Datasheet

(NSN) National Stock Number

6685-01-248-0946

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6685 - Humidity Measuring and Controlling Instruments, Temperature and Pressure

(NIIN) National Item Identification Number

01-248-0946

Requires Demilitarization

Yes

(INC) Item Name Code

05662

Date

Fri, Jan 16, 1987

Schedule B Code

9032896040

Frequency In Hertz

50.0 or 60.0

Inclosure Type

encased

Material

plastic case

Phase

single

Maximum Overall Height

3.781 inches

Maximum Overall Length

5.500 inches

Maximum Voltage Rating In Volts

240.0 ac

Maximum Overall Width

3.781 inches

Maximum Wattage Rating In Watts

6.0

Mounting Method

panel

Operating Temp Range

+25.0 to 250.0 fahrenheit

Power Source

external

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0005662

Cross Reference

CAGE Codes

73168

Kidde Technologies, Inc Dba Fenwal Safety Systems Div Fenwall Safety Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

EZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

F - 150.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

33170

Water Commodity

652 - Instruments, scientific

National Motor Freight Classification Item Number

058240

Schedule B & Trade

Schedule B

9032-89-6040

Description

process control instruments and apparatus for temperature control

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87465

(NAICS) North American Industrial Classification System

334513

Questions & Answers

1. What is the FSCG of the NSN 6685-01-248-0946?

   The FSCG of the NSN 6685-01-248-0946 is 6685

2. Does the NSN 6685-01-248-0946 have a Schedule B code assigned?

   Yes, the Schedule B code is 9032896040

3. Does NSN 6685-01-248-0946 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6685-01-248-0946 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6685-01-248-0946 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6685-01-248-0946 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Fri, Jan 16, 1987