NSN 554695

An item whose resistance is known to a high degree of accuracy which permits it to be used as a basis for determining the value of other resistances, capacitances, and/or inductances and for calibrating instruments. See also resistor, fixed (as modified) and shunt, instrument. Excludes:resistor, decade.

90.0 degrees nominal first leg angle, 0.585 inches minimum and 0.615 inches maximum center section width, 0.071 inches minimum and 0.085 inches maximum center section thickness, formed fabrication method, 1.990 inches minimum and 2.010 inches maximum center section height.

NSN 5340-00-920-7761 Datasheet

(NSN) National Stock Number

5340-00-920-7761

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-920-7761

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Fri, Jan 1, 1960

Schedule B Code

7326190000

Center Section Height

1.990 inches minimum and 2.010 inches maximum

Center Section Thickness

0.071 inches minimum and 0.085 inches maximum

Center Section Width

0.585 inches minimum and 0.615 inches maximum

Fabrication Method

formed

First Leg Angle

90.0 degrees nominal

First Leg Distance From Edge To Hole Center Along Width

0.290 inches minimum and 0.310 inches maximum

First Leg End Radius

0.469 inches minimum and 0.531 inches maximum

First Leg Hole Arrangement Style

one hole

First Leg Hole Diameter

0.214 inches minimum and 0.224 inches maximum

First Leg Distance From Edge To Hole Center Along Length

0.240 inches minimum and 0.260 inches maximum

First Leg Style

end radius

First Leg Thickness

0.071 inches minimum and 0.085 inches maximum

First Leg Width

0.585 inches minimum and 0.615 inches maximum

First Leg Length

1.100 inches minimum and 1.120 inches maximum

Material Document And Classification

ams 5504 assn std single material response

Material

steel comp 410

Second Leg Angle

90.0 degrees nominal

Second Leg End Radius

0.469 inches minimum and 0.531 inches maximum

Second Leg Hole Arrangement Style

one hole

Second Leg Hole Diameter

0.214 inches minimum and 0.224 inches maximum

Second Leg Length

1.100 inches minimum and 1.120 inches maximum

Second Leg Distance From Edge To Hole Center Along Length

0.240 inches minimum and 0.260 inches maximum

Second Leg Distance From Edge To Hole Center Along Width

0.290 inches minimum and 0.310 inches maximum

Second Leg Thickness

0.071 inches minimum and 0.085 inches maximum

Second Leg Width

0.585 inches minimum and 0.615 inches maximum

Second Leg Relationship To First Leg

not identical

Second Leg Style

end radius

Style Designator

double angle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

34830

Rogerson Kratos

U.s./canadian manufacturers

77445

Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney

Non-manufacturers

81924

Atomic Energy Commission Oak Ridge Opns Office

U.s./canadian manufacturers

JA269

Tokyo Judoi Kogyo K.k.

Non-us manufacturer (nato), other foreign organization or codification bureaus

S0554

Tokyo Judogi Kogyo Co.

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

7326-19-0000

Description

other articles of iron or steel forged or stamped, but not further worked, nesoi

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69965

(NAICS) North American Industrial Classification System

332111

Questions & Answers

1. What is the FSCG of the NSN 5340-00-920-7761?

   The FSCG of the NSN 5340-00-920-7761 is 5340

2. Does the NSN 5340-00-920-7761 have a Schedule B code assigned?

   Yes, the Schedule B code is 7326190000

3. Does NSN 5340-00-920-7761 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-00-920-7761 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-00-920-7761 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-920-7761 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960