NSN 555N065A080

An item consisting of a definite length of detonating cord, having ends which are terminated with caps containing a quantity of explosive. The ends also incorporate a means to permit connection to another detonating cord assembly or item.

0.540 inches minimum and 0.640 inches maximum body diameter, contact load current rating, increase contact action stimulus, 0.280 inches minimum and 0.395 inches maximum body height, deactuation point not adjustable and actuation point not adjustable contact adjustability.

NSN 5930-01-267-5986 Datasheet

(NSN) National Stock Number

5930-01-267-5986

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-267-5986

Requires Demilitarization

Yes

(INC) Item Name Code

00451

Date

Sat, Nov 14, 1987

Schedule B Code

9032100000

Body Diameter

0.540 inches minimum and 0.640 inches maximum

Body Height

0.280 inches minimum and 0.395 inches maximum

Contact Action Stimulus

increase

Contact Adjustability

deactuation point not adjustable and actuation point not adjustable

Contact Load Current Rating

Contact Stimulus Rating

80.00 actuation point nominal degrees fahrenheit and 65.00 deactuation point nominal degrees fahrenheit

Contact Voltage Rating In Volts

unable to decode

Distance Between Mounting Facility Centers

0.937 inches nominal

Features Provided

hermetically sealed case

Frequency In Hertz

unable to decode

Media For Which Designed

gas or liquid

Mounting Facility Pattern

two position in-line

Mounting Method

bracket(s) and slot and unthreaded hole(s)

Mounting Slot Width

0.140 inches nominal

Nonpile-Up Contact Arrangement

1 pole, single throw, normally closed, momentary action

Operating Temp Rating

-65.0 fahrenheit minimum and 500.0 fahrenheit maximum

Overall Height

0.521 inches nominal

Overall Length

1.160 inches minimum and 1.260 inches maximum

Specification/Standard Data

81349-mil-s-24236/1 government specification

Style Designator

disc w/flange

Temp Sensing Element Type

internal sensor

Terminal Type

tab, solder lug

Test Data Document

"81349-mil-s-24236 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.140 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000451

Cross Reference

CAGE Codes

82647

Sensata Technologies, Inc. Div Sensata Attleboro

U.s./canadian manufacturers

97896

Honeywell International Inc. Dba Honeywell Div Aerospace ? Redmond Commercial

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

9032-10-0000

Description

thermostats

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87461

(NAICS) North American Industrial Classification System

334512

Questions & Answers

1. What is the FSCG of the NSN 5930-01-267-5986?

   The FSCG of the NSN 5930-01-267-5986 is 5930

2. Does the NSN 5930-01-267-5986 have a Schedule B code assigned?

   Yes, the Schedule B code is 9032100000

3. Does NSN 5930-01-267-5986 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-267-5986 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-267-5986 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-267-5986 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Sat, Nov 14, 1987