NSN 5652090

An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or printed wiring board and is not designed to be mounted on a bulkhead, chasses, panel, printed wiring board, or the like. Excludes:jack, telephone; jack, tip; plug, telephone; plug tip; insert, electrical connector; connector body (as modified); and socket, plug-in, electronic components. See also lead assembly, electrical; wiring harness (as modified); and cable assembly (as modified). For items without inserts, see shell, electrical connector.

0.120 inches minimum and 0.130 inches maximum base material thickness, rubber synthetic overall material, 9.057 inches minimum and 9.067 inches maximum overall diameter, 70.0 degrees nominal feather edge angle, 8.370 inches minimum and 8.380 inches maximum center hole diameter.

NSN 5340-00-565-2090 Datasheet

(NSN) National Stock Number

5340-00-565-2090

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-565-2090

Requires Demilitarization

Yes

(INC) Item Name Code

03435

Date

Tue, Jan 1, 1963

Base Material Thickness

0.120 inches minimum and 0.130 inches maximum

Center Hole Diameter

8.370 inches minimum and 8.380 inches maximum

Feather Edge Angle

70.0 degrees nominal

Material

rubber synthetic overall

Overall Diameter

9.057 inches minimum and 9.067 inches maximum

Overall Length

0.276 inches minimum and 0.286 inches maximum

Recess Major Inside Diameter

9.030 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0003435

Cross Reference

CAGE Codes

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

24617

General Motors Corp

U.s./canadian manufacturers

72590

Hydramatic Div of General Motors Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Questions & Answers

1. What is the FSCG of the NSN 5340-00-565-2090?

   The FSCG of the NSN 5340-00-565-2090 is 5340

2. Does NSN 5340-00-565-2090 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-565-2090 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-565-2090 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-565-2090 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963