NSN 5690P

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

white color, plastic polyester material, plain removable backing surface condition, 50.000 yards nominal length, paper removable backing type.

NSN 9330-01-400-2126 Datasheet

(NSN) National Stock Number

9330-01-400-2126

(FSG) Federal Supply Group

93 - Nonmetallic Fabricated Materials

(FSC) Federal Supply Classification

9330 - Plastics Fabricated Materials

(NIIN) National Item Identification Number

01-400-2126

Requires Demilitarization

Yes

(INC) Item Name Code

21952

Date

Sat, Dec 10, 1994

Schedule B Code

3919905060

Color

white

Length

50.000 yards nominal

Material

plastic polyester

Removable Backing Surface Condition

plain

Removable Backing Type

paper

Special Features

non-perforated; temp. rating; -65 to +250 deg. fahrenheit; resistant to salt spray, solvent, corrosion and heat.

Thickness

0.005 inches nominal

Width

30.000 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0021952

Cross Reference

CAGE Codes

34360

3m Company Div Automotive Div

U.s./canadian manufacturers

76381

3m Company

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

77835

Water Commodity

845 - Plastic fabricated materials incl containers, pallets, sheets and other plastic material

National Motor Freight Classification Item Number

156830

Schedule B & Trade

Schedule B

3919-90-5060

Description

self-adhesive plates, sheets, film, foil, tape, strip & other flat shapes of plastics, whether or not in rolls, nesoi

End Use

12770 - Other industrial supplies

Unit of Quantity

M2

USDA

Yes

(SITC) Standard International Trade Classification

58219

(NAICS) North American Industrial Classification System

322220

Questions & Answers

1. What is the FSCG of the NSN 9330-01-400-2126?

   The FSCG of the NSN 9330-01-400-2126 is 9330

2. Does the NSN 9330-01-400-2126 have a Schedule B code assigned?

   Yes, the Schedule B code is 3919905060

3. Does NSN 9330-01-400-2126 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 9330-01-400-2126 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 9330-01-400-2126 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 9330-01-400-2126 was assigned to the Federal Catalog?

   It was assigned 31 years ago, on Sat, Dec 10, 1994