NSN 5793070077

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.625 inches nominal arm shaft end major diameter, 13.0 to 1 gear ratio, 2320-01-380-8604; w/s truck, vehicle sstem, 1 1/4-ton (hmmwv) end item identification, serrated arm shaft end type, hydraulic actuation method.

NSN 2530-01-423-1796 Datasheet

(NSN) National Stock Number

2530-01-423-1796

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2530 - Vehicular Brake, Steering, Axle, Wheel and Track Components

(NIIN) National Item Identification Number

01-423-1796

Requires Demilitarization

Yes

(INC) Item Name Code

19540

Date

Mon, Dec 18, 1995

Schedule B Code

8708945000

End Item Identification

2320-01-380-8604; w/s truck, vehicle sstem, 1 1/4-ton (hmmwv)

Actuation Method

hydraulic

Arm Shaft End Major Diameter

0.625 inches nominal

Arm Shaft End Type

serrated

Gear Ratio

13.0 to 1

Horn Button

not included

Horn Cable

not included

Power Actuation Design Feature

included

Steering Arm

not included

Steering Wheel Shaft Centerline To Steering Arm Shaft End Distance

7.281 inches nominal

Steering Wheel Shaft Tube

not included

Steering Wheel

not included

Wheel Shaft End Type

serrated

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0019540

Cross Reference

CAGE Codes

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

34623

Am General Llc

U.s./canadian manufacturers

A00AM

E.c.a Etablissement Central des Approvisionnements des Forces Armees Royales

Military standards and standards organizations (ex:stanags,milspecs,defstans)

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

0A335

Linear Motion Llc

U.s./canadian manufacturers

52788

General Motors Corp Saginaw Div

U.s./canadian manufacturers

G2780

Mengia S.a.

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

09100

Water Commodity

72C - Tacticle vehicles, repair parts, parts, components and test/tool sets and equipment

National Motor Freight Classification Item Number

019670

Schedule B & Trade

Schedule B

8708-94-5000

Description

steering wheels, steering columns and steering boxes for vehicles, nesoi

End Use

30230 - Other parts and accessories of vehicles

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

78439

(NAICS) North American Industrial Classification System

336330

Questions & Answers

1. What is the FSCG of the NSN 2530-01-423-1796?

   The FSCG of the NSN 2530-01-423-1796 is 2530

2. Does the NSN 2530-01-423-1796 have a Schedule B code assigned?

   Yes, the Schedule B code is 8708945000

3. Does NSN 2530-01-423-1796 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2530-01-423-1796 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2530-01-423-1796 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2530-01-423-1796 was assigned to the Federal Catalog?

   It was assigned 30 years ago, on Mon, Dec 18, 1995