NSN 579R046H01

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

w/thd mtg hole(s)/stud(s) terminal(s) on one surface body style, 4.980 inches minimum and 5.020 inches maximum body length, 0.100 microfarads all sections capacitance value per section, 1.500 inches nominal body width, 3.000 inches maximum body height.

NSN 5910-00-050-2136 Datasheet

(NSN) National Stock Number

5910-00-050-2136

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-050-2136

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Tue, May 9, 1967

Schedule B Code

8532290020

Body Height

3.000 inches maximum

Body Length

4.980 inches minimum and 5.020 inches maximum

Body Style

w/thd mtg hole(s)/stud(s) terminal(s) on one surface

Body Width

1.500 inches nominal

Capacitance Value Per Section

0.100 microfarads all sections

Center To Center Distance Between Terminals Parallel To Length

3.000 inches nominal

Dissipation Factor At Reference Temp In Percent

0.500

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

4.250 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.600 inches nominal

Insulation Resistance At Reference Temp

60000.0 megohms

Material

plastic case

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

4 threaded mounting studs

Nominal Thread Size

0.138 inches

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

8000.000 dc all sections

Reliability Indicator

not established

Schematic Diagram Designator

series connected

Section Quantity

2

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

-3.0 to 5.0 all sections

Terminal Length

0.310 inches maximum

Terminal Surface Treatment

solder

Terminal Type And Quantity

3 solder stud

Test Data Document

97942-579r046h01 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Tolerance Range Per Section

-10.00 to 10.00 percent all sections

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

97942

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems

U.s./canadian manufacturers

28839

Teledyne Industries Inc Teledyne Power Systems Div

U.s./canadian manufacturers

59501

Unison Industries Llc

U.s./canadian manufacturers

77820

Amphenol Corp Div Amphenol Aerospace Operations

U.s./canadian manufacturers

23280

Custom Electronics, Inc. Dba Custom Electronics Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-050-2136?

   The FSCG of the NSN 5910-00-050-2136 is 5910

2. Does the NSN 5910-00-050-2136 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-00-050-2136 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-050-2136 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-00-050-2136 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-050-2136 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Tue, May 9, 1967