NSN 57A5A14838

A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see capacitor, fixed, plastic dielectric. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see capacitor, fixed, metalized, paper-plastic dielectric.

110.0 ac at sea level contact voltage rating in volts, breaks before makes each section rear contact switching action, 2.0 amperes resistive load dc at sea level contact load current rating, 150.0 milliamperes resistive load ac at sea level contact load current rating, 15.0 dc at sea level contact voltage rating in volts.

NSN 5930-00-752-2738 Datasheet

(NSN) National Stock Number

5930-00-752-2738

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-752-2738

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Mon, Jan 1, 1962

Schedule B Code

8536509020

Contact Load Current Rating

150.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

2.0 amperes resistive load dc at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

110.0 ac at sea level

Contact Voltage Rating In Volts

15.0 dc at sea level

Individual Section Quantity

2

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.438 inches nominal at 9:00 oclock

Nonturn Device Type

tab at 9:00 oclock

Overall Height

1.495 inches minimum and 1.505 inches maximum

Overall Length

3.906 inches nominal

Overall Width

1.307 inches minimum and 1.317 inches maximum

Pole Quantity

1 each section rear

Shaft Diameter

0.247 inches minimum and 0.250 inches maximum single actuator

Shaft Length

2.234 inches minimum and 2.266 inches maximum single actuator

Shaft Type

round single actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

12 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

adjustable stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.375 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

11 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

02734

Lockheed Martin Corporation Dba Lockheed Martin Aerostructures Div Advanced Technology Laboratories

Non-manufacturers

49671

Lockheed Martin Corporation Dba Lockheed Martin Div Lockheed Martin

U.s./canadian manufacturers

95542

Northrop Grumman Systems Corporation

U.s./canadian manufacturers

30003

Naval Air Systems Command Managed Original Design Activity Not Material/parts Supplier

Government departments or units, including military organizations

02387

Naval Air Warfare Center Aircraft Div

U.s./canadian manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

19203

Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament

Government departments or units, including military organizations

71590

Crl Components Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-752-2738?

   The FSCG of the NSN 5930-00-752-2738 is 5930

2. Does the NSN 5930-00-752-2738 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-752-2738 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-752-2738 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-752-2738 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-752-2738 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962