NSN 5830009

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

1.610 inches minimum and 1.640 inches maximum adapter height, sma coaxial connector series designation, 1.610 inches minimum and 1.640 inches maximum adapter overall width, 1.593 inches nominal adapter overall height, 1.300 inches maximum adapter length.

NSN 5985-01-367-9922 Datasheet

(NSN) National Stock Number

5985-01-367-9922

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-367-9922

Requires Demilitarization

Yes

(INC) Item Name Code

00186

Date

Mon, Nov 23, 1992

Schedule B Code

8529109000

Adapter Height

1.610 inches minimum and 1.640 inches maximum

Adapter Length

1.300 inches maximum

Adapter Overall Height

1.593 inches nominal

Adapter Overall Width

1.610 inches minimum and 1.640 inches maximum

Coaxial Connector Series Designation

sma

Connector End Design

female

Cross-Sectional Shape Style

internal, rectangular external, rectangular

Flange Inside Height

Flange Inside Width

Flange Connecting Facility And Quantity

unable to decode

Flange Connecting Hole Diameter

Flange Depth

Flange Outside Height

Flange Outside Width

Flange Quantity

1

Flange Style

unable to decode

Material

unable to decode

Maximum Operating Pressure

15.0 pounds per square inch gage

Style Designator

waveguide to coaxial

Surface Treatment

unable to decode

Tubing Wall Construction Style

unable to decode

Voltage Standing Wave Ratio

1.10

Waveguide Inside Height

0.396 inches minimum and 0.404 inches maximum

Waveguide Inside Width

0.996 inches minimum and 1.004 inches maximum

Waveguide Outside Height

0.496 inches minimum and 0.504 inches maximum

Waveguide Outside Width

0.996 inches minimum and 1.004 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000186

Cross Reference

CAGE Codes

02769

Lockheed Martin Corporation Div Rms

U.s./canadian manufacturers

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

28916

Atlantic Microwave Corporation Div Cobham Electronic Systems

U.s./canadian manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

99899

Narda Holdings, Inc. Dba Narda-Miteq Div Narda-Miteq

U.s./canadian manufacturers

01456

Microwave Development Laboratories, Inc. Dba Microwave Development Laboratories Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49770

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063520

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-367-9922?

   The FSCG of the NSN 5985-01-367-9922 is 5985

2. Does the NSN 5985-01-367-9922 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-367-9922 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5985-01-367-9922 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-367-9922 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-367-9922 was assigned to the Federal Catalog?

   It was assigned 33 years ago, on Mon, Nov 23, 1992