NSN 5905482

An item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. Excludes:internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. For cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).

unable to decode dc resistance rating in ohms, 0.500 inches maximum body length, 1.375 inches nominal body outside diameter, unable to decode frequency rating, vibration resistant hazardous locations/environmental protection.

NSN 5950-01-347-1849 Datasheet

(NSN) National Stock Number

5950-01-347-1849

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-347-1849

Requires Demilitarization

Yes

(INC) Item Name Code

00724

Date

Thu, Oct 17, 1991

Schedule B Code

8504900020

Body Length

0.500 inches maximum

Body Outside Diameter

1.375 inches nominal

Dc Resistance Rating In Ohms

unable to decode

Frequency Rating

unable to decode

Hazardous Locations/Environmental Protection

vibration resistant

Inductance Rating

unable to decode

Inductance Type

fixed

Inclosure Type

fully inclosed

Maximum Operating Temp

130.0 celsius

Mounting Facility Quantity

unable to decode

Mounting Hole Diameter

Mounting Method

unable to decode

Rating Method

Reliability Indicator

not established

Terminal Type And Quantity

4 wire lead

Test Data Document

99167-5905482 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Turn Quantity

unable to decode

Winding Conductor Size

unable to decode

Winding Quantity

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000724

Cross Reference

CAGE Codes

99167

Hamilton Sundstrand Corporation

U.s./canadian manufacturers

96253

Transformer Technicians Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34420

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063498

Schedule B & Trade

Schedule B

8504-90-0020

Description

transformer parts

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77129

(NAICS) North American Industrial Classification System

335311

Questions & Answers

1. What is the FSCG of the NSN 5950-01-347-1849?

   The FSCG of the NSN 5950-01-347-1849 is 5950

2. Does the NSN 5950-01-347-1849 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504900020

3. Does NSN 5950-01-347-1849 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-347-1849 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-01-347-1849 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-347-1849 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Thu, Oct 17, 1991