NSN 5965PL1365951

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

81349 connector manufacturer code, 3 cable conductor quantity, connector accessory components, hand held body style, jj-033 connector identification.

NSN 5965-00-070-8520 Datasheet

(NSN) National Stock Number

5965-00-070-8520

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5965 - Microphones and Speakers Handsets Headsets

(NIIN) National Item Identification Number

00-070-8520

Requires Demilitarization

Yes

(INC) Item Name Code

00362

Date

Thu, Jul 20, 1967

Schedule B Code

8518903000

Accessory Components

connector

Body Style

hand held

Cable Conductor Quantity

3

Connector Identification

jj-033

Connector Manufacturer Code

81349

Electrical Connection Type

integral cable

Extended Cable Length

4.0 feet nominal

Frequency Response Range In Hertz

+300.0 to 4000.0

Height

1.563 inches nominal

Impedance Rating

150.0 ohms nominal

Impedance Selection Method

integral switch

Length

3.562 inches nominal

Mounting Method

clip

Output Sensitivity Rating In Decibels

-65.0

Output Sensitivity Rating Reference

10 dynes per sq centimeter

Polarity Connection

not required

Retracted Cable Length

0.7 feet nominal

Sound Pickup Directional Type

bidirectional

Switch Type

push

Width

2.250 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000362

Cross Reference

CAGE Codes

80249

Bae Systems Information and Electronic Systems Integration Inc.

U.s./canadian manufacturers

82348

Du Pont E I de Nemours and Co Inc Dupont Printing and Publishing

U.s./canadian manufacturers

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

81134

Bosch Security Systems, Inc Dba Use Cage Code 25734 for Cataloging Div Communications Division

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

87660

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

178580

Schedule B & Trade

Schedule B

8518-90-3000

Description

microphone parts, loudspeaker parts, amplifier parts & headphone parts

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76492

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5965-00-070-8520?

   The FSCG of the NSN 5965-00-070-8520 is 5965

2. Does the NSN 5965-00-070-8520 have a Schedule B code assigned?

   Yes, the Schedule B code is 8518903000

3. Does NSN 5965-00-070-8520 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5965-00-070-8520 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5965-00-070-8520 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5965-00-070-8520 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Thu, Jul 20, 1967