NSN 5JX118A5

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2.125 inches nominal body length, 0.750 inches nominal body outside diameter, encased inclosure type, unable to decode functional terminal type and quantity, 50.0 ohms blank load impedance per function.

NSN 5915-00-907-5513 Datasheet

(NSN) National Stock Number

5915-00-907-5513

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

00-907-5513

Requires Demilitarization

Yes

(INC) Item Name Code

00765

Date

Fri, Jan 1, 1960

Schedule B Code

8527995030

Body Length

2.125 inches nominal

Body Outside Diameter

0.750 inches nominal

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

encased

Load Impedance Per Function

50.0 ohms blank

Maximum Dielectric Withstanding Dc Voltage

200.0 volts at sea level

Mounting Facility Screw Thread Series Designator

unef

Mounting Facility Type And Quantity

1 threaded bushing

Nominal Thread Size

0.500 inches

Operating Current Rating Per Function In Amps

5.0 blank

Operating Voltage Rating And Type Per Function

100.0 volts dc blank

Operating Temp Range

-55.0 to 85.0 celsius

Overall Length

3.093 inches nominal

Principal Circuitry Type Per Function

inductance-capacitance blank

Source Impedance Rating Per Function

50.0 ohms blank

Style Designator

round terminal/terminals on opposite surfaces

Vibration Resistance Range In Hertz

+10.0 to 2000.0

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000765

Cross Reference

CAGE Codes

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-00-907-5513?

   The FSCG of the NSN 5915-00-907-5513 is 5915

2. Does the NSN 5915-00-907-5513 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-00-907-5513 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5915-00-907-5513 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-00-907-5513 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-00-907-5513 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960