NSN 5M1685-001

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

+1.00 to 16.00 actuation point inches of water and +1.00 to 16.00 deactuation point inches of water contact adjustment range, deactuation point adjustable and actuation point adjustable contact adjustability, internal deactuation point screw and internal actuation point screw contact adjustment type, 2.000 inches nominal body length, increase contact action stimulus.

NSN 5930-01-115-5121 Datasheet

(NSN) National Stock Number

5930-01-115-5121

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-115-5121

Requires Demilitarization

Yes

(INC) Item Name Code

00206

Date

Wed, Jul 8, 1981

Schedule B Code

8536509065

Body Length

2.000 inches nominal

Contact Action Stimulus

increase

Contact Adjustability

deactuation point adjustable and actuation point adjustable

Contact Adjustment Range

+1.00 to 16.00 actuation point inches of water and +1.00 to 16.00 deactuation point inches of water

Contact Adjustment Type

internal deactuation point screw and internal actuation point screw

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

15.00 differential point nominal inches of water

Contact Voltage Rating In Volts

unable to decode

End Item Identification

target g n el 76301

Hazardous Locations/Environmental Protection

dustproof

Longest Horizontal Distance Between Mounting Centers

1.750 inches nominal

Longest Vertical Distance Between Mounting Centers

0.880 inches nominal

Media For Which Designed

gas

Mounting Facility Pattern

four position rectangular

Mounting Method

slot and threaded hole(s)

Mounting Slot Width

0.160 inches nominal

Nominal Thread Size

unable to decode

Nonpile-Up Contact Arrangement

1 pole, single throw, normally open, momentary action

Outside Diameter

unable to decode

Overall Height

1.130 inches nominal

Overall Length

2.250 inches nominal

Overall Width

2.250 inches nominal

Pressure Connector Type

unable to decode

Pressure Switch Type

gage

Terminal Type

screw

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000206

Cross Reference

CAGE Codes

76301

The Boeing Company Div Defense

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-115-5121?

   The FSCG of the NSN 5930-01-115-5121 is 5930

2. Does the NSN 5930-01-115-5121 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-115-5121 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-115-5121 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-115-5121 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-115-5121 was assigned to the Federal Catalog?

   It was assigned 45 years ago, on Wed, Jul 8, 1981