NSN 5P3841

An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see insulator, (as modified). Excludes:holder, (as modified); retainer, (as modified), and spacer, plate.

5330-01-348-8428, nonmetallic special shaped seal.

NSN 5330-01-348-8428 Datasheet

(NSN) National Stock Number

5330-01-348-8428

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

01-348-8428

Requires Demilitarization

Yes

(INC) Item Name Code

32847

Date

Mon, Nov 18, 1991

Schedule B Code

3926904500

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032847

Cross Reference

CAGE Codes

11083

Caterpillar Inc Div Caterpillar Defense

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

78100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194050

Schedule B & Trade

Schedule B

3926-90-4500

Description

gaskets,washers & other seals

End Use

12770 - Other industrial supplies

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-01-348-8428?

   The FSCG of the NSN 5330-01-348-8428 is 5330

2. Does the NSN 5330-01-348-8428 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926904500

3. Does NSN 5330-01-348-8428 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-01-348-8428 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5330-01-348-8428 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-01-348-8428 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Mon, Nov 18, 1991