NSN 5T8

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

45.0 fahrenheit minimum and 85.0 fahrenheit maximum operating temp rating, unable to decode contact voltage rating in volts, gas media for which designed, bracket(s) mounting method, unable to decode contact load current rating.

NSN 5930-00-132-0182 Datasheet

(NSN) National Stock Number

5930-00-132-0182

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-132-0182

Requires Demilitarization

Yes

(INC) Item Name Code

00451

Date

Wed, Dec 11, 1968

Schedule B Code

9032100000

Contact Load Current Rating

unable to decode

Contact Voltage Rating In Volts

unable to decode

Media For Which Designed

gas

Mounting Method

bracket(s)

Operating Temp Rating

45.0 fahrenheit minimum and 85.0 fahrenheit maximum

Overall Height

3.125 inches nominal

Overall Length

3.218 inches nominal

Overall Width

2.875 inches nominal

Special Features

fan delay temperature setting 25 deg f porm 5 deg f

Temp Sensing Element Type

capillary tube-bulb

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000451

Cross Reference

CAGE Codes

92578

Johnson Controls Inc Control Products Div

U.s./canadian manufacturers

03950

Naval Inventory Control Point Mechanicsburg

U.s./canadian manufacturers

39433

Mcquay-Perfex Inc

U.s./canadian manufacturers

50239

Krack Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

9032-10-0000

Description

thermostats

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87461

(NAICS) North American Industrial Classification System

334512

Questions & Answers

1. What is the FSCG of the NSN 5930-00-132-0182?

   The FSCG of the NSN 5930-00-132-0182 is 5930

2. Does the NSN 5930-00-132-0182 have a Schedule B code assigned?

   Yes, the Schedule B code is 9032100000

3. Does NSN 5930-00-132-0182 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-132-0182 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-132-0182 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-132-0182 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Wed, Dec 11, 1968