NSN 600D271

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes:bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

1.437 inches maximum body length, 0.359 inches minimum and 0.421 inches maximum body diameter, w/o mtg facilities, axial terminals body style, etched foil anode type, 13.000 microfarads single section capacitance value per section.

NSN 5910-00-004-0304 Datasheet

(NSN) National Stock Number

5910-00-004-0304

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-004-0304

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Wed, May 24, 1972

Schedule B Code

8532290040

Anode Type

etched foil

Body Diameter

0.359 inches minimum and 0.421 inches maximum

Body Length

1.437 inches maximum

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

13.000 microfarads single section

Capacitive Electrode Material

aluminum

Case Insulation Material

plastic

Dc Leakage At Reference Temp

9.000 microamperes

Dissipation Factor At Reference Temp In Percent

6.0000

Electrical Polarization

polarized

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

200.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

electrode(s) grounded to case, w/gnd terminal

Terminal Length

1.875 inches minimum and 2.125 inches maximum

Terminal Surface Treatment

copper

Terminal Type And Quantity

2 insulated wire lead

Tolerance Range Per Section

-10.00 to 50.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

98230

National Security Agency

U.s./canadian manufacturers

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-004-0304?

   The FSCG of the NSN 5910-00-004-0304 is 5910

2. Does the NSN 5910-00-004-0304 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-004-0304 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-004-0304 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-004-0304 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-004-0304 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Wed, May 24, 1972