NSN 6018-97A

An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes:items with more than one hole. See also insulator, disk; insulator, bead; insulator, bushing; and insulator, plate

0.510 inches minimum and 0.550 inches maximum distance from loop center to end, 0.735 inches minimum and 0.805 inches maximum loop/holding dimension, unable to decode material document and classification, 0.790 inches minimum and 0.830 inches maximum length, 0.153 inches minimum and 0.159 inches maximum hole diameter.

NSN 5340-00-958-3172 Datasheet

(NSN) National Stock Number

5340-00-958-3172

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-958-3172

Requires Demilitarization

Yes

(INC) Item Name Code

20815

Date

Tue, Jan 1, 1963

Schedule B Code

7326908630

Distance From Loop Center To End

0.510 inches minimum and 0.550 inches maximum

Hole Diameter

0.153 inches minimum and 0.159 inches maximum

Length

0.790 inches minimum and 0.830 inches maximum

Loop/Holding Dimension

0.735 inches minimum and 0.805 inches maximum

Material Document And Classification

unable to decode

Material Thickness

0.027 inches minimum and 0.032 inches maximum

Material

unable to decode

Mounting Method

unthreaded hole(s)

Overall Height

0.900 inches minimum and 0.940 inches maximum

Surface Treatment Document And Classification

unable to decode

Surface Treatment

Width

0.990 inches minimum and 1.010 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020815

Cross Reference

CAGE Codes

99378

Atlee of Delaware, Incorporated

U.s./canadian manufacturers

A486G

Nimikkeistokeskus Ncb Finland

Government departments or units, including military organizations

05037

Anacomp, Inc.

Non-manufacturers

06424

Alliant Techsystems Operations Llc Div Defense Electronic Systems

U.s./canadian manufacturers

92755

Northrop Grumman Systems Corp Dba Northrop Grumman Systems Corp Div Land & Self Protection Systems Div

U.s./canadian manufacturers

12436

Bae Systems Information and Electronic Systems Integration Inc. Div Bae Systems Information & Electronic Systems Integration Inc

U.s./canadian manufacturers

91506

Augat Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49780

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094220

Schedule B & Trade

Schedule B

7326-90-8630

Description

hangers and similar supports for tubes and pipes, of iron or steel

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69969

(NAICS) North American Industrial Classification System

332999

Questions & Answers

1. What is the FSCG of the NSN 5340-00-958-3172?

   The FSCG of the NSN 5340-00-958-3172 is 5340

2. Does the NSN 5340-00-958-3172 have a Schedule B code assigned?

   Yes, the Schedule B code is 7326908630

3. Does NSN 5340-00-958-3172 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-00-958-3172 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-00-958-3172 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-958-3172 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963