NSN 601D279

A fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).

w/o mtg facilities, axial terminals body style, aluminum capacitive electrode material, 47.000 microfarads single section capacitance value per section, 1.125 inches minimum and 1.328 inches maximum body length, 0.883 inches nominal body diameter.

NSN 5910-01-162-3432 Datasheet

(NSN) National Stock Number

5910-01-162-3432

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-162-3432

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Sat, Sep 17, 1983

Schedule B Code

8532290040

Body Diameter

0.883 inches nominal

Body Length

1.125 inches minimum and 1.328 inches maximum

Body Style

w/o mtg facilities, axial terminals

Capacitive Electrode Material

aluminum

Capacitance Value Per Section

47.000 microfarads single section

Case Insulation Material

plastic

Dc Leakage At Reference Temp

41.000 microamperes

Dc Leakage At Maximum Operating Temp

246.0 microamperes

Electrical Polarization

polarized

Equivalent Series Resistance At Reference Temp In Ohms

2.82

Impedance At Minimum Operating Temp In Ohms

57.0

Nonderated Operating Temp

-55.0 celsius minimum and 105.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

150.0 dc single section

Reliability Indicator

established

Reliability Failure Rate Level In Percent

1.0000

Schematic Diagram Designator

electrode(s) grounded to case, w/gnd terminal

Specification/Standard Data

81349-mil-c-39018/3 government specification

Terminal Diameter

0.040 inches nominal

Terminal Length

2.500 inches nominal

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-39018 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-10.00 to 30.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

0P569

B. Microfarads, Inc. Dba Barker Microfarads

Non-manufacturers

00853

Cornell-Dubilier Marketing Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-162-3432?

   The FSCG of the NSN 5910-01-162-3432 is 5910

2. Does the NSN 5910-01-162-3432 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-162-3432 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-162-3432 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-162-3432 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-162-3432 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Sat, Sep 17, 1983