NSN 602-30CE

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.244 inches maximum body diameter, 0.670 inches nominal body length, w/o mtg facilities, radial terminals body style, 30.000 picofarads single section capacitance value per section, 0.500 inches nominal center to center distance between terminals parallel to length.

NSN 5910-01-085-9002 Datasheet

(NSN) National Stock Number

5910-01-085-9002

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-085-9002

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Sun, Nov 18, 1979

Schedule B Code

8532250080

Body Diameter

0.244 inches maximum

Body Length

0.670 inches nominal

Body Style

w/o mtg facilities, radial terminals

Capacitance Value Per Section

30.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.500 inches nominal

Insulation Resistance At Reference Temp

500000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 70.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

63.0 dc single section

Quality Factor At Reference Temp

2000.0000

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

-100.0 single section

Terminal Diameter

0.025 inches nominal

Terminal Length

1.180 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-50.0 to 50.0 single section

Tolerance Range Per Section

-0.625 to 0.625 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

28009

Sypris Electronics, Llc Div Sypris Electronics, Llc - Colorado Field Services

U.s./canadian manufacturers

26625

M I a L U S a Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-085-9002?

   The FSCG of the NSN 5910-01-085-9002 is 5910

2. Does the NSN 5910-01-085-9002 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-01-085-9002 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-085-9002 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-085-9002 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-085-9002 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Sun, Nov 18, 1979