NSN 6043582

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

steel material, bolt down mounting type, 3.53 inches nominal overall width, curved shape.

NSN 2540-01-610-2522 Datasheet

(NSN) National Stock Number

2540-01-610-2522

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2540 - Vehicular Furniture and Accessories

(NIIN) National Item Identification Number

01-610-2522

Requires Demilitarization

Yes

(INC) Item Name Code

47312

Date

Tue, Aug 14, 2012

Schedule B Code

9403901000

Material

steel

Mounting Type

bolt down

Overall Width

3.53 inches nominal

Shape

curved

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0047312

Cross Reference

CAGE Codes

34623

Am General Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

08910

Water Commodity

586 - Vehicle parts, other than automobile

National Motor Freight Classification Item Number

019097

Questions & Answers

1. What is the FSCG of the NSN 2540-01-610-2522?

   The FSCG of the NSN 2540-01-610-2522 is 2540

2. Does the NSN 2540-01-610-2522 have a Schedule B code assigned?

   Yes, the Schedule B code is 9403901000

3. Does NSN 2540-01-610-2522 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2540-01-610-2522 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2540-01-610-2522 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2540-01-610-2522 was assigned to the Federal Catalog?

   It was assigned 14 years ago, on Tue, Aug 14, 2012