1. Home /
  2. FSC NSN Catalog /
  3. Switches /
  4. 606GE3

NSN 606GE3

Pressure Switch

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

unable to decode contact voltage rating in volts, +60.00 to 225.00 actuation point pounds per square inch contact adjustment range, internal actuation point serrated nut contact adjustment type, actuation point adjustable contact adjustability, contact load current rating.

NSN 5930-01-057-5030 Datasheet

(NSN) National Stock Number
5930-01-057-5030
(FSC) Federal Supply Classification
5930 - Switches
(NIIN) National Item Identification Number
01-057-5030
Requires Demilitarization
Yes
(INC) Item Name Code
00206
Date
Tue, Mar 14, 1978
Schedule B Code
8536509065
Contact Adjustability
actuation point adjustable
Contact Adjustment Type
internal actuation point serrated nut
Contact Adjustment Range
+60.00 to 225.00 actuation point pounds per square inch
Contact Load Current Rating
Contact Voltage Rating In Volts
unable to decode
Frequency In Hertz
Nominal Thread Size
unable to decode
Nonpile-Up Contact Arrangement
1 pole, double throw, one position momentary
Operating Temp Rating
-30.0 celsius minimum and 70.0 celsius maximum
Overall Height
3.100 inches nominal
Overall Length
6.280 inches nominal
Overall Width
4.250 inches nominal
Pressure Connector Type
unable to decode
Pressure Switch Type
gage
Proof Pressure
4500.00 pounds per square inch
Terminal Type
wire lead
Thread Quantity Per Inch
unable to decode
Thread Series Designator
unable to decode

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
U - Precious metal content is unknown
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0000206

Cross Reference

CAGE Codes

09049
Custom Control Sensors, Llc
U.s./canadian manufacturers

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Less than Carload Rating
P - 77.5
National Motor Freight Class Rating
M - 85.0
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
34430
Water Commodity
658 - Electrical appliances, small
National Motor Freight Classification Item Number
061360

Schedule B & Trade

Schedule B
8536-50-9065
Description
switches, for a voltage not exceeding 1000 volts, nesoi
End Use
20005 - Electric apparatus
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77255
(NAICS) North American Industrial Classification System
335931

Questions & Answers

  1. What is the FSCG of the NSN 5930-01-057-5030?

    The FSCG of the NSN 5930-01-057-5030 is 5930

  2. Does the NSN 5930-01-057-5030 have a Schedule B code assigned?

    Yes, the Schedule B code is 8536509065

  3. Does NSN 5930-01-057-5030 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 5930-01-057-5030 contain precious materials?

    Precious metal content is unknown

  5. Does NSN 5930-01-057-5030 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 5930-01-057-5030 was assigned to the Federal Catalog?

    It was assigned 48 years ago, on Tue, Mar 14, 1978

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.