NSN 60C14

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

4.900 inches nominal body length, type no. ls-166/u end item identification, 0.125 inches nominal body width, 4.900 inches nominal body height, aluminum material.

NSN 5965-00-702-7257 Datasheet

(NSN) National Stock Number

5965-00-702-7257

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5965 - Microphones and Speakers Handsets Headsets

(NIIN) National Item Identification Number

00-702-7257

Requires Demilitarization

Yes

(INC) Item Name Code

00665

Date

Tue, Jan 1, 1963

Schedule B Code

8518903000

Body Height

4.900 inches nominal

Body Length

4.900 inches nominal

Body Width

0.125 inches nominal

End Item Identification

type no. ls-166/u

Material

aluminum

Mounting Configuration

four 0.149 in. dia mtg holes on 4-17/32 in. by 4-17/32 in. mtg centers

Special Features

12 drainage slots,3 on ea edge; surface treatment: olive drab paint

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000665

Cross Reference

CAGE Codes

87771

University Sound Inc Affil of Mark Iv Industries Inc

U.s./canadian manufacturers

2P778

Bard C R Inc Bard Urological Div

Non-manufacturers

32001

International Jensen Inc Jensen Sound Laboratories

U.s./canadian manufacturers

8X583

Accusonic Systems Corp Sub of Designatronics Inc

U.s./canadian manufacturers

15788

Radalab Inc

U.s./canadian manufacturers

20800

Ordnance Parts and Engineering Co

U.s./canadian manufacturers

33708

Micacraft Products Co Inc

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

84792

Heppner Mfg Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35290

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

063300

Schedule B & Trade

Schedule B

8518-90-3000

Description

microphone parts, loudspeaker parts, amplifier parts & headphone parts

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76492

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5965-00-702-7257?

   The FSCG of the NSN 5965-00-702-7257 is 5965

2. Does the NSN 5965-00-702-7257 have a Schedule B code assigned?

   Yes, the Schedule B code is 8518903000

3. Does NSN 5965-00-702-7257 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5965-00-702-7257 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5965-00-702-7257 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5965-00-702-7257 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963