NSN 60E024PC25

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

1.625 inches nominal overall width, 1.781 inches nominal overall height, 1.344 inches nominal overall length, feat criticality code justification, support equipment b-52,t-38,f-106,f-16,t-37,c-5,f-15,f-5,f100-pw engine end item identification.

NSN 5930-00-983-6298 Datasheet

(NSN) National Stock Number

5930-00-983-6298

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-983-6298

Requires Demilitarization

Yes

(INC) Item Name Code

00621

Date

Tue, Jan 1, 1963

Schedule B Code

9803200000

Criticality Code Justification

feat

End Item Identification

support equipment b-52,t-38,f-106,f-16,t-37,c-5,f-15,f-5,f100-pw engine

Overall Height

1.781 inches nominal

Overall Length

1.344 inches nominal

Overall Width

1.625 inches nominal

Special Features

body 1:moving contact 2:stationart contact 4,two no. 6/0.138 in./-32 screws on irregular mtg centers,weapom system essential

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000621

Cross Reference

CAGE Codes

08372

Eaton Yale Ltdcutler-Hammer Industrial Controls

Non-us manufacturer (nato), other foreign organization or codification bureaus

15605

Eaton Corp Opns & Technical Center

U.s./canadian manufacturers

88026

Eaton Corp Custom Distribution and Control Div Los Angeles Plant

U.s./canadian manufacturers

27192

Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc

U.s./canadian manufacturers

61361

Rexworks Inc

U.s./canadian manufacturers

95169

Curtiss-Wright Flow Control Corporation Dba Curtiss-Wright Flow Control Co Div Target Rock Division

U.s./canadian manufacturers

25004

Inland Power Group, Inc. Dba Inland Detroit Diesel Allison

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

9803-20-0000

Description

military equipments not identified by kind

End Use

50070 - Parts for military-type goods

Unit of Quantity

X

USDA

Yes

(SITC) Standard International Trade Classification

93100

(NAICS) North American Industrial Classification System

990000

Questions & Answers

1. What is the FSCG of the NSN 5930-00-983-6298?

   The FSCG of the NSN 5930-00-983-6298 is 5930

2. Does the NSN 5930-00-983-6298 have a Schedule B code assigned?

   Yes, the Schedule B code is 9803200000

3. Does NSN 5930-00-983-6298 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5930-00-983-6298 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-983-6298 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-983-6298 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963