NSN 60E306

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

3.500 inches nominal inside diameter, round cross-sectional shape style, unable to decode burst test pressure, 1st layer braided fabric and 2nd layer helix wire coil and outer layer molded rubber, neoprene layer composition and location, smooth inside surface condition.

NSN 4720-01-235-5574 Datasheet

(NSN) National Stock Number

4720-01-235-5574

(FSG) Federal Supply Group

47 - Pipe, Tubing, Hose, and Fittings

(FSC) Federal Supply Classification

4720 - Hose and Flexible Tubing

(NIIN) National Item Identification Number

01-235-5574

Requires Demilitarization

Yes

(INC) Item Name Code

22670

Date

Wed, Jul 2, 1986

Schedule B Code

4009210000

Burst Test Pressure

unable to decode

Cross-Sectional Shape Style

round

Inside Diameter

3.500 inches nominal

Inside Surface Condition

smooth

Layer Composition And Location

1st layer braided fabric and 2nd layer helix wire coil and outer layer molded rubber, neoprene

Material

unable to decode

Maximum Operating Pressure

unable to decode

Minimum Inside Bending Radius

17.000 inches

Outer Covering Environmental Protection

heat resistant and oil resistant and weatherproof

Outside Diameter

3.938 inches nominal

Temp Rating

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0022670

Cross Reference

CAGE Codes

24161

Gates Corporation

U.s./canadian manufacturers

94830

Pellerin Milnor Corporation

Non-manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

R - 65.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95540

Water Commodity

736 - Plumbing supplies

National Motor Freight Classification Item Number

195040

Schedule B & Trade

Schedule B

4009-21-0000

Description

tubes, pipes and hoses, of vulcanized rubber, exc hard rubber, reinforced/otherwise combined only with metal, without fittings

End Use

12750 - Industrial rubber products

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

62142

(NAICS) North American Industrial Classification System

326220

Questions & Answers

1. What is the FSCG of the NSN 4720-01-235-5574?

   The FSCG of the NSN 4720-01-235-5574 is 4720

2. Does the NSN 4720-01-235-5574 have a Schedule B code assigned?

   Yes, the Schedule B code is 4009210000

3. Does NSN 4720-01-235-5574 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 4720-01-235-5574 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 4720-01-235-5574 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 4720-01-235-5574 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Wed, Jul 2, 1986