NSN 613984

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

12.0 millimeters maximum body length, w/o mtg facilities, terminal(s) on one end body style, aluminum capacitive electrode material, 6.8 millimeters maximum body diameter, plain foil anode type.

NSN 5910-01-365-9904 Datasheet

(NSN) National Stock Number

5910-01-365-9904

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-365-9904

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Mon, Oct 19, 1992

Schedule B Code

8532290040

Anode Type

plain foil

Body Diameter

6.8 millimeters maximum

Body Length

12.0 millimeters maximum

Body Style

w/o mtg facilities, terminal(s) on one end

Capacitive Electrode Material

aluminum

Capacitance Value Per Section

47.000 microfarads single section

Case Insulation Material

plastic

Center To Center Distance Between Terminals Parallel To Diameter

2.5 millimeters nominal

Dc Leakage At Reference Temp

1.940 microamperes

Dissipation Factor At Reference Temp In Percent

0.120

Electrical Polarization

polarized

Nonderated Operating Temp

-40.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

10.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.6 millimeters nominal

Terminal Length

3.0 millimeters nominal

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-20.00 to 20.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

89536

Fluke Corp

U.s./canadian manufacturers

62643

United Chemi-Con, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-365-9904?

   The FSCG of the NSN 5910-01-365-9904 is 5910

2. Does the NSN 5910-01-365-9904 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-365-9904 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-365-9904 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-365-9904 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-365-9904 was assigned to the Federal Catalog?

   It was assigned 33 years ago, on Mon, Oct 19, 1992