NSN 617110

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

2530-00-394-9653, hydraulic brake master parts kit.

NSN 2530-00-394-9653 Datasheet

(NSN) National Stock Number

2530-00-394-9653

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2530 - Vehicular Brake, Steering, Axle, Wheel and Track Components

(NIIN) National Item Identification Number

00-394-9653

Requires Demilitarization

Yes

(INC) Item Name Code

17121

Date

Fri, Apr 12, 1974

Schedule B Code

8708300050

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0017121

Cross Reference

CAGE Codes

0AHU0

Kalmar Ac Inc

U.s./canadian manufacturers

14892

Bendix Corp the Brake and Steering Div

U.s./canadian manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

07256

Silicon Transistor Corporation Dba Same

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

08480

Water Commodity

585 - Vehicles and auto supplies

National Motor Freight Classification Item Number

018400

Schedule B & Trade

Schedule B

8708-30-0050

Description

brakes and servo-brakes and parts, of motor vehicles of headings 8701 to 8705

End Use

30230 - Other parts and accessories of vehicles

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

78433

(NAICS) North American Industrial Classification System

336340

Questions & Answers

1. What is the FSCG of the NSN 2530-00-394-9653?

   The FSCG of the NSN 2530-00-394-9653 is 2530

2. Does the NSN 2530-00-394-9653 have a Schedule B code assigned?

   Yes, the Schedule B code is 8708300050

3. Does NSN 2530-00-394-9653 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2530-00-394-9653 contain precious materials?

   Precious metal content is unknown

5. Does NSN 2530-00-394-9653 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2530-00-394-9653 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Fri, Apr 12, 1974