NSN 631-E-244

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

white single indicator single range background color, unable to decode dial scale marking color, unable to decode accuracy in percent, dc circuit current for which designed, 2 solder lug and 2 threaded stud circuit attachment method and quantity.

NSN 6625-01-046-6350 Datasheet

(NSN) National Stock Number

6625-01-046-6350

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-046-6350

Requires Demilitarization

Yes

(INC) Item Name Code

16449

Date

Sat, Aug 20, 1977

Schedule B Code

9030908030

Accuracy In Percent

unable to decode

Background Color

white single indicator single range

Circuit Attachment Method And Quantity

2 solder lug and 2 threaded stud

Circuit Current For Which Designed

dc

Dial Scale Marking Color

unable to decode

Dielectric Withstanding Voltage In Volts

3000.0

Environmental Protection

airtight and dust resistant and fungus resistant and heat resistant and humidity resistant and shock resistant and vibration resistant and water resistant

Features Provided

magnetic shield and zero adjuster

Fsc Application Data

test set,elect. equip.

Furnished Items And Quantity

nut 7; lockwasher 5; seal 1

Indicator Type

dial w/pointer

Installation Design

panel

Material

steel

Measurement Range

unable to decode

Meter Body Diameter Behind Mounting Flange

2.760 inches maximum

Meter Depth Behind Mounting Flange

1.380 inches maximum

Mounting Arrangement Style

three hole/stud bolt circle

Mounting Bolt Circle Diameter

3.160 inches nominal

Mounting Hole Diameter

0.166 inches nominal

Mounting Facility Type And Quantity

3 screw and 3 unthreaded hole(s)

Movement Suspension Method

jewel pivot base

Movement Type

moving coil, permanent magnet

Nuclear Hardness Critical Feature

nonhardened

Overall Diameter

3.500 inches maximum

Overall Length

2.470 inches maximum

Pointer Color

unable to decode

Power Source

external

Scale Division Quantity

unable to decode

Scale Graduation Type

unable to decode

Sensitivity Rating

2.0 ohms

Special Features

ruggedized

Special Markings

on back,sealed do not open

Special Test Features

complies with mil-m-10304

Style Designator

round flush mtg

Surface Treatment

paint

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016449

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

77221

Phaostron Instrument and Electronic Company

U.s./canadian manufacturers

94375

Lax Electronics, Inc. Dba Automatic Connector Div Automatic Connector

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34540

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

061620

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-01-046-6350?

   The FSCG of the NSN 6625-01-046-6350 is 6625

2. Does the NSN 6625-01-046-6350 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-01-046-6350 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-01-046-6350 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-01-046-6350 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-01-046-6350 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Sat, Aug 20, 1977