NSN 632675-027

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

round, terminal/terminals in opposite surface body style, transmission line application design, sma coaxial connector series designation, female input and male output connection type per function, -0.75 to 0.75 attenuation accuracy in decibels.

NSN 5985-01-340-6311 Datasheet

(NSN) National Stock Number

5985-01-340-6311

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-340-6311

Requires Demilitarization

Yes

(INC) Item Name Code

14224

Date

Mon, Jun 17, 1991

Schedule B Code

8529109000

Application Design

transmission line

Attenuation Accuracy In Decibels

-0.75 to 0.75

Body Style

round, terminal/terminals in opposite surface

Coaxial Connector Series Designation

sma

Connection Type Per Function

female input and male output

Frequency Range

0.000 hertz minimum and 18.000 gigahertz maximum

Fsc Application Data

antennas,waveguides,and related equip.

Input Impedance Rating In Ohms

50.0

Material

unable to decode

Mounting Method

connector

Output Impedance Rating In Ohms

50.0

Overall Diameter

0.400 inches maximum

Overall Length

1.040 inches maximum

Rf Signal Attenuation In Decibels

7.0

Specification/Standard Data

14482-632675 manufacturers source control

Terminal Type And Quantity

2 connector

Unpackaged Unit Weight

0.500 ounces

Voltage Standing Wave Ratio

1.15 and 1.30 and 1.35

Voltage Standing Wave Ratio Frequency Range

+0.0 to 4.0 gigahertz and +4.0 to 12.4 gigahertz and +12.4 to 18.0 gigahertz

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0014224

Cross Reference

CAGE Codes

96341

Cobham Advanced Electronic Solutions Inc.

U.s./canadian manufacturers

15280

Northrop Grumman Systems Corporation Div Es Defensive Systems Division

U.s./canadian manufacturers

26916

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Multiple

U.s./canadian manufacturers

34078

Cinch Connectivity Solutions Inc

U.s./canadian manufacturers

14482

Watkins-Johnson Co

U.s./canadian manufacturers

64671

Spectrum Control, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

06330

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

060535

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-340-6311?

   The FSCG of the NSN 5985-01-340-6311 is 5985

2. Does the NSN 5985-01-340-6311 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-340-6311 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5985-01-340-6311 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-340-6311 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-340-6311 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Mon, Jun 17, 1991