NSN 638-E614

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

black single indicator single range background color, unable to decode accuracy in percent, 4 screw circuit attachment method and quantity, dial scale marking color, ac circuit current for which designed.

NSN 6625-00-593-7826 Datasheet

(NSN) National Stock Number

6625-00-593-7826

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

00-593-7826

Requires Demilitarization

Yes

(INC) Item Name Code

16476

Date

Tue, Jan 1, 1963

Schedule B Code

9030908030

Accuracy In Percent

unable to decode

Background Color

black single indicator single range

Circuit Attachment Method And Quantity

4 screw

Circuit Current For Which Designed

ac

Dial Scale Marking Color

Dielectric Withstanding Voltage In Volts

2000.0

Environmental Protection

cold resistant and fungus resistant and heat resistant and humidity resistant

Features Provided

rectifier circuit and electrical overload protection and zero adjuster

Frequency Response Range

+60.000 to 400.000 hertz

Furnished Items And Quantity

nut 3; washer 3; term. deck 1

Indicator Type

dial w/pointer

Installation Design

panel

Material

steel

Meter Body Diameter Behind Mounting Flange

2.800 inches maximum

Meter Depth Behind Mounting Flange

2.510 inches maximum

Mounting Arrangement Style

three hole/stud bolt circle

Mounting Bolt Circle Diameter

3.146 inches minimum and 3.174 inches maximum

Mounting Hole Diameter

0.150 inches nominal

Mounting Facility Type And Quantity

3 screw and 3 unthreaded hole(s)

Movement Suspension Method

jewel pivot base

Movement Type

moving coil, permanent magnet

Overall Diameter

3.490 inches minimum and 3.510 inches maximum

Overall Length

2.890 inches maximum

Pointer Color

Scale Marking

10,0,10

Scale Division Quantity

unable to decode

Scale Graduation Type

unable to decode

Special Markings

five graduation marks and pointer tip pale green luminous

Special Test Features

conforms to mil-m-10304

Style Designator

round flush mtg

Supplementary Features

50 ko signal impedance

Surface Treatment

enamel

Special Features

synchronism indication

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016476

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

77221

Phaostron Instrument and Electronic Company

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

H - 110.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

136750

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-00-593-7826?

   The FSCG of the NSN 6625-00-593-7826 is 6625

2. Does the NSN 6625-00-593-7826 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-00-593-7826 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-00-593-7826 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-00-593-7826 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-00-593-7826 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963