NSN 64A92B977

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

unable to decode main contact load current rating at maximum rated voltage, 1 coil quantity, 28.0 dc main contact maximum voltage rating in volts, continuous duty type, unable to decode center to center distance between mounting facilities parallel to length.

NSN 5945-00-917-6000 Datasheet

(NSN) National Stock Number

5945-00-917-6000

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

00-917-6000

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Fri, Jul 29, 1966

Schedule B Code

8536410020

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Coil Quantity

1

Duty Type

continuous

Main Contact Load Current Rating At Maximum Rated Voltage

unable to decode

Main Contact Maximum Voltage Rating In Volts

28.0 dc

Mounting Facility Pattern

unable to decode

Mounting Facility Type And Quantity

2 slotted hole single mounting facility

Mounting Slot Width

unable to decode

Nominal Operating Current Rating And Type

unable to decode

Nonpile-Up Main Contact Arrangement

1 pole, single throw, normally open, momentary action

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

2.370 inches nominal

Overall Length

5.250 inches maximum

Overall Width

2.620 inches nominal

Terminal Type And Quantity

unable to decode

Winding Dc Resistance Rating

unable to decode

Winding Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

12617

Hamlin Inc

U.s./canadian manufacturers

58296

Watlow Winona Inc

U.s./canadian manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

30003

Naval Air Systems Command Managed Original Design Activity Not Material/parts Supplier

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-41-0020

Description

relays, electromechanical, with contacts rated less than 10 a, for a voltage not exceeding 60 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5945-00-917-6000?

   The FSCG of the NSN 5945-00-917-6000 is 5945

2. Does the NSN 5945-00-917-6000 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536410020

3. Does NSN 5945-00-917-6000 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-00-917-6000 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5945-00-917-6000 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-00-917-6000 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Fri, Jul 29, 1966