NSN 64C42512

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

external actuation point screw contact adjustment type, +1.00 to 7.00 actuation point pounds per square inch contact adjustment range, deactuation point not adjustable and actuation point adjustable contact adjustability, increase contact action stimulus, unable to decode contact load current rating.

NSN 5930-00-770-4231 Datasheet

(NSN) National Stock Number

5930-00-770-4231

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-770-4231

Requires Demilitarization

Yes

(INC) Item Name Code

00206

Date

Fri, Jan 1, 1960

Schedule B Code

8536509065

Contact Action Stimulus

increase

Contact Adjustability

deactuation point not adjustable and actuation point adjustable

Contact Adjustment Range

+1.00 to 7.00 actuation point pounds per square inch

Contact Adjustment Type

external actuation point screw

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

1.50 deactuation point nominal pounds per square inch and 4.50 differential point nominal pounds per square inch

Contact Voltage Rating In Volts

unable to decode

Frequency In Hertz

unable to decode

Media For Which Designed

gas or liquid

Mounting Method

inlet connection

Nominal Thread Size

unable to decode

Nonpile-Up Contact Arrangement

1 pole, single throw, normally closed, momentary action

Overall Diameter

1.688 inches nominal

Overall Length

2.000 inches nominal

Pressure Connector Type

unable to decode

Pressure Switch Type

gage

Style Designator

cylindrical

Terminal Type

tab w/screw

Thread Class

unable to decode

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000206

Cross Reference

CAGE Codes

75377

Kurz & Root Generator Company, Llc

U.s./canadian manufacturers

98749

Sacramento Air Logistics Center Sm-Alc/liil

U.s./canadian manufacturers

74400

Hobbs Corp

U.s./canadian manufacturers

K5070

Devonport Royal Dockyard Limited, Devonport Royal Dockyard

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-770-4231?

   The FSCG of the NSN 5930-00-770-4231 is 5930

2. Does the NSN 5930-00-770-4231 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-00-770-4231 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-770-4231 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-770-4231 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-770-4231 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960