NSN 6516196

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1610-00-330-7964, regulator bracket.

NSN 1610-00-330-7964 Datasheet

(NSN) National Stock Number

1610-00-330-7964

(FSG) Federal Supply Group

16 - Aerospace Craft Components and Accessories

(FSC) Federal Supply Classification

1610 - Aircraft Propellers and Components

(NIIN) National Item Identification Number

00-330-7964

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, Jan 1, 1963

Schedule B Code

8803100060

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

FLZ - Warner-robins air logistics center 455 byron st robins afb, ga 31098-1860

Pseudo Item Name Code

1077211

Cross Reference

CAGE Codes

24617

General Motors Corp

U.s./canadian manufacturers

70168

Aeroproducts Opns of Allison Div of General Motors Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 1610-00-330-7964?

   The FSCG of the NSN 1610-00-330-7964 is 1610

2. Does the NSN 1610-00-330-7964 have a Schedule B code assigned?

   Yes, the Schedule B code is 8803100060

3. Does NSN 1610-00-330-7964 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 1610-00-330-7964 contain precious materials?

   Precious metal content is unknown

5. Does NSN 1610-00-330-7964 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 1610-00-330-7964 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963