NSN 655519

A rodlike item used to handle helicopter rotary blades from the ground to facilitate folding of blades for stowage, placing of tie down equipment, blade removal, and the like. Excludes:rack, rotary wing blade.

0.071 inches minimum and 0.086 inches maximum center section thickness, 120.0 degrees nominal first leg angle, 0.410 inches minimum and 0.430 inches maximum center section height, 0.428 inches minimum and 0.448 inches maximum center section width, stamped fabrication method.

NSN 5340-00-403-5265 Datasheet

(NSN) National Stock Number

5340-00-403-5265

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-403-5265

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Thu, Jul 2, 1970

Center Section Height

0.410 inches minimum and 0.430 inches maximum

Center Section Thickness

0.071 inches minimum and 0.086 inches maximum

Center Section Width

0.428 inches minimum and 0.448 inches maximum

Fabrication Method

stamped

First Leg Angle

120.0 degrees nominal

First Leg Distance From Edge To Hole Center Along Width

0.209 inches minimum and 0.229 inches maximum

First Leg End Radius

0.156 inches nominal

First Leg Hole Arrangement Style

one hole

First Leg Hole Diameter

0.136 inches minimum and 0.146 inches maximum

First Leg Distance From Edge To Hole Center Along Length

0.156 inches nominal

First Leg Style

end radius and tapered

First Leg Thickness

0.071 inches minimum and 0.086 inches maximum

First Leg Width

0.428 inches minimum and 0.448 inches maximum

First Leg Length

0.508 inches minimum and 0.518 inches maximum

Fsc Application Data

jet engine,acft

Material Document And Classification

fed-std-66 mil std single material response

Material

steel comp 4130

Mounting Hole Type

plain

Second Leg Angle

120.0 degrees nominal

Second Leg Hole Arrangement Style

no hole

Second Leg Length

0.770 inches nominal

Second Leg Thickness

0.071 inches minimum and 0.086 inches maximum

Second Leg Width

0.428 inches minimum and 0.448 inches maximum

Second Leg Relationship To First Leg

not identical

Second Leg Style

end radius

Style Designator

double angle

Surface Treatment Document And Classification

ams 2400 assn std single treatment response

Surface Treatment

cadmium

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

77445

Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney

Non-manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Rail Variation

1

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-00-403-5265?

   The FSCG of the NSN 5340-00-403-5265 is 5340

2. Does NSN 5340-00-403-5265 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-403-5265 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-403-5265 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-403-5265 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Thu, Jul 2, 1970