NSN 656B812

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

11 component quantity.

NSN 5120-01-077-7298 Datasheet

(NSN) National Stock Number

5120-01-077-7298

(FSG) Federal Supply Group

51 - Hand Tools

(FSC) Federal Supply Classification

5120 - Nonpowered Nonedged Hand Tools

(NIIN) National Item Identification Number

01-077-7298

Requires Demilitarization

Yes

(INC) Item Name Code

24158

Date

Thu, May 31, 1979

Schedule B Code

8204110030

Component Quantity

11

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0024158

Cross Reference

CAGE Codes

52346

Jensen Tools Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

91810

Water Commodity

732 - Tools, hand and portable, electric

National Motor Freight Classification Item Number

186620

Schedule B & Trade

Schedule B

8204-11-0030

Description

open-end, box and combination open-end and box wrenches, base metal

End Use

21190 - Photo, service industry machinery

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

69530

(NAICS) North American Industrial Classification System

332216

Questions & Answers

1. What is the FSCG of the NSN 5120-01-077-7298?

   The FSCG of the NSN 5120-01-077-7298 is 5120

2. Does the NSN 5120-01-077-7298 have a Schedule B code assigned?

   Yes, the Schedule B code is 8204110030

3. Does NSN 5120-01-077-7298 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5120-01-077-7298 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5120-01-077-7298 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5120-01-077-7298 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Thu, May 31, 1979