NSN 6580A62

1.120 inches maximum body width, discrimination at specified frequencies per function in decibels, unable to decode functional terminal type and quantity, 1.510 inches maximum body length, frequency band width per function.

NSN 5915-00-005-2627 Datasheet

(NSN) National Stock Number

5915-00-005-2627

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

00-005-2627

Requires Demilitarization

Yes

(INC) Item Name Code

00209

Date

Wed, Jun 14, 1972

Schedule B Code

8527995030

Frequency Band Width Per Function

493.6 kilohertz 1st band pass and 493.65 kilohertz 1st band pass

Iii Specified Frequencies Of Discrimination Per Function

493.125 kilohertz 2nd band pass and 493.9 kilohertz 2nd band pass and 493.95 kilohertz 2nd band pass and 494.725 kilohertz 2nd band pass 2nd function

Frequency Band Width Per Function

493.9 kilohertz 2nd band pass and 493.95 kilohertz 2nd band pass

Specified Frequencies Of Discrimination Per Function

493.125 kilohertz 2nd band pass 2nd function and 493.9 kilohertz 2nd band pass 2nd function and 493.95 kilohertz 2nd band pass 2nd function and 494.725 kilohertz 2nd band pass 2nd function

Specified Frequencies Of Discrimination Per Function

492.825 kilohertz 1st band pass 1st function and 493.6 kilohertz 1st band pass 1st function and 493.65 kilohertz 1st band pass 1st function and 494.425 kilohertz 1st band pass 1st function

Functional Terminal Type and Quantity

4 pin output 2nd function

Functional Terminal Type and Quantity

2 pin ground 3rd function

Inclosure Type

Encased

Functional Terminal Type and Quantity

1 pin input 1st function

Mounting Facility Type and Quantity

7 terminal

Principal Circuitry Type Per Function

Crystal 1st band pass 1st function

Insertion Loss At Reference Frequency Per Function In Decibels

3 2nd band pass

Load Impedance Per Function

50 ohms 2nd band pass

Insertion Loss At Reference Frequency Per Function In Decibels

3 1st band pass 1st function

Source Impedance Rating Per Function

50 ohms 1st band pass 1st function

Vibration Resistance Range In Hertz

+10/+2000

Source Impedance Rating Per Function

50 ohms 2nd band pass

Load Impedance Per Function

50 ohms 1st band pass 1st function

Principal Circuitry Type Per Function

Crystal 2nd band pass 2nd function

Operating Temperature Range

-20 to 71 degree celsius

Reference Frequency Per Function

493.925 single radio interference two phase to two phase

Overall Height

0.595 inches maximum

Reference Frequency Per Function

493.625 single radio interference pulses per second

Body Length

1.51 inches maximum

Body Width

1.12 inches maximum

Overall Length

1.51 inches maximum

Discrimination At Specified Frequencies Per Function In Decibels

30 minimum 1st band pass 1st function and 1.5 maximum 1st band pass 1st function and 1.5 maximum 1st band pass 1st function and 30.0 minimum 1st band pass 1st function

Discrimination At Specified Frequencies Per Function In Decibels

30 minimum 2nd band pass 2nd function and 1.5 maximum 2nd band pass 2nd function and 1.5 maximum 2nd band pass 2nd function and 30.0 minimum 2nd band pass 2nd function

Style Designator

Rectangular terminal/terminals on opposite surfaces

Iii Discrimination At Specified Frequencies Per Function In Decibels

30 minimum 1st band pass and 1.5 maximum 1st band pass and 1.5 maximum 1st band pass and 30.0 minimum 1st band pass 1st function

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000209

Cross Reference

CAGE Codes

82567

Cts Reeves Frequency Products

U.s./canadian manufacturers

17304

Damon Corp Electronics Div

U.s./canadian manufacturers

82577

Raytheon Company Dba Raytheon

Non-manufacturers

55267

Raytheon Company Dba Raytheon

U.s./canadian manufacturers

71034

Bliley Technologies Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

593 - Motors and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-00-005-2627?

   The FSCG of the NSN 5915-00-005-2627 is 5915

2. Does the NSN 5915-00-005-2627 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-00-005-2627 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5915-00-005-2627 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-00-005-2627 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-00-005-2627 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Wed, Jun 14, 1972