NSN 658771

A puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see puller kit, universal. Excludes:hydraulic force actuated items.

0.640 inches nominal center section width, 0.344 inches nominal first leg end radius, end radius and tapered first leg style, 90.0 degrees nominal first leg angle, 0.038 inches minimum and 0.043 inches maximum center section thickness.

NSN 5340-00-449-3401 Datasheet

(NSN) National Stock Number

5340-00-449-3401

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-449-3401

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Fri, May 15, 1970

Center Section Thickness

0.038 inches minimum and 0.043 inches maximum

Center Section Width

0.640 inches nominal

First Leg Angle

90.0 degrees nominal

First Leg End Radius

0.344 inches nominal

First Leg Style

end radius and tapered

First Leg Thickness

0.038 inches minimum and 0.043 inches maximum

First Leg Width

1.328 inches nominal

First Leg Length

1.284 inches nominal

First Leg Offset Angle

90.0 degrees nominal

Fsc Application Data

jet engine,acft

Material Document And Classification

sae51410 fed spec single material response

Material

steel comp 410

Second Leg Angle

99.0 degrees nominal

Second Leg End Radius

0.250 inches nominal

Second Leg Length

1.150 inches nominal

Second Leg Width

0.500 inches nominal

Second Leg Style

end radius

Second Leg Thickness

0.038 inches minimum and 0.043 inches maximum

Style Designator

double angle

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

77445

Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney

Non-manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Rail Variation

1

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-00-449-3401?

   The FSCG of the NSN 5340-00-449-3401 is 5340

2. Does NSN 5340-00-449-3401 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

3. Does NSN 5340-00-449-3401 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-449-3401 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-449-3401 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Fri, May 15, 1970