Request Pricing & Availability

NSN: 3040-00-001-2341
Part Number(s):
Name & Email:
Order Terms | Privacy Policy    

Cross Reference These part numbers have the same form, fit, and function of 659380

Item Number Cage
659380 05234

Characteristic Codes 659380 spec. code meanings

Code Translation
AAHN A term used to identify the ends as identical or not identical.
AMDL The length of a straight line which passes through the center of the first end, and terminates at the circumference.
AAGZ The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
AAHP The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.
ABHP The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
CSYM Designates the specific surface roughness rating, representing the arithmetic average deviation of the surface from the meanline in profile.

659380 Straight Shaft

Mfr. Cage 05234


steel Length: 2-3/8"

AAHN End Similarity
Not identical
AMDL First End Diameter
From 0.2480" and 0.2510"
AAGZ First End Style
MDCL Material Spec
Qq-s-763,class 303,cond a fed spec single material response or qq-s-763,class 304,cond a fed spec single material response
MATT Material
AMFQ Second End Distance From End To Groove
0.120 inches
AAHX Second End Groove Diameter
0.1880 inches
AAHW Second End Groove Width
0.0160 inches
AAHP Second End Style
Circular grooved
ABHP Overall Length
2.380 inches
CSYM Surface Finish
63.0 microinches

Technical Definition

Shaft, Straight, also referenced with federal logistics item name code 22109 - A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.
National Stock Number (NSN) 3040-00-001-2341

Last Modified: 02/14/2017