NSN 665333

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.056 inches minimum and 0.062 inches maximum material thickness, not included cushion, 1.460 inches nominal inside diameter/arch length, 2.350 inches nominal distance between mounting hole centers, 0.730 inches nominal distance between base and inside of arch.

NSN 5340-00-147-9123 Datasheet

(NSN) National Stock Number

5340-00-147-9123

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-147-9123

Requires Demilitarization

Yes

(INC) Item Name Code

05072

Date

Wed, Sep 22, 1971

Cushion

not included

Distance Between Base And Inside Of Arch

0.730 inches nominal

Distance Between Mounting Hole Centers

2.350 inches nominal

Inside Diameter/Arch Length

1.460 inches nominal

Material Thickness

0.056 inches minimum and 0.062 inches maximum

Material

steel comp 410 location not otherwise specified

Mounting Hole Size

0.214 inches minimum and 0.224 inches maximum

Mounting Pad

not included

Overall Length

2.776 inches minimum and 2.796 inches maximum

Overall Width

0.485 inches minimum and 0.515 inches maximum

Style Designator

curved arch

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0005072

Cross Reference

CAGE Codes

11449

Turbo Power & Marine System Inc Sub of United Technologies Corp

U.s./canadian manufacturers

34830

Rogerson Kratos

U.s./canadian manufacturers

77445

Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney

Non-manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-00-147-9123?

   The FSCG of the NSN 5340-00-147-9123 is 5340

2. Does NSN 5340-00-147-9123 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-147-9123 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-147-9123 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-147-9123 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Wed, Sep 22, 1971