NSN 666025-E

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

11 component quantity, government component document origin, tm10-3930-243-34p document identification, 75 component document page number, model rtl10 end item identification.

NSN 2530-00-068-2744 Datasheet

(NSN) National Stock Number

2530-00-068-2744

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2530 - Vehicular Brake, Steering, Axle, Wheel and Track Components

(NIIN) National Item Identification Number

00-068-2744

Requires Demilitarization

Yes

(INC) Item Name Code

21073

Date

Mon, Dec 4, 1967

Schedule B Code

8708300050

End Item Identification

model rtl10

Component Document Origin

government

Component Document Page Number

75

Component Quantity

11

Document Identification

tm10-3930-243-34p

Document Source

19099

Document Type

technical manual

End Item Name

fork @lift truck

End Item Source

46717

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0021073

Cross Reference

CAGE Codes

16662

Lift Parts Mfg Co Inc Div of Echlin Mfg Co the

U.s./canadian manufacturers

84561

Parker Hannifin Corporation Dba Pneutronics Div Cylinder Division

U.s./canadian manufacturers

26337

Parker-Hannifin Corporation Div Hydraulic Accumulator Division

U.s./canadian manufacturers

64575

Parker Hannifin Corporation Div Hydraulic Accumulator Division

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

08480

Water Commodity

585 - Vehicles and auto supplies

National Motor Freight Classification Item Number

018400

Schedule B & Trade

Schedule B

8708-30-0050

Description

brakes and servo-brakes and parts, of motor vehicles of headings 8701 to 8705

End Use

30230 - Other parts and accessories of vehicles

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

78433

(NAICS) North American Industrial Classification System

336340

Questions & Answers

1. What is the FSCG of the NSN 2530-00-068-2744?

   The FSCG of the NSN 2530-00-068-2744 is 2530

2. Does the NSN 2530-00-068-2744 have a Schedule B code assigned?

   Yes, the Schedule B code is 8708300050

3. Does NSN 2530-00-068-2744 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2530-00-068-2744 contain precious materials?

   Precious metal content is unknown

5. Does NSN 2530-00-068-2744 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2530-00-068-2744 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Mon, Dec 4, 1967