NSN 6675155

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

bobcat 750 g-series skid steer loader end item identification, 100.000 continuous current rating in amps.

NSN 5920-01-563-8345 Datasheet

(NSN) National Stock Number

5920-01-563-8345

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

01-563-8345

Requires Demilitarization

Yes

(INC) Item Name Code

00248

Date

Fri, May 23, 2008

End Item Identification

bobcat 750 g-series skid steer loader

Continuous Current Rating In Amps

100.000

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000248

Cross Reference

CAGE Codes

1QK63

Doosan Bobcat North America, Inc. Div Bobcat Company

U.s./canadian manufacturers

9W224

Melroe Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34740

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062060

Questions & Answers

1. What is the FSCG of the NSN 5920-01-563-8345?

   The FSCG of the NSN 5920-01-563-8345 is 5920

2. Does NSN 5920-01-563-8345 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5920-01-563-8345 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5920-01-563-8345 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5920-01-563-8345 was assigned to the Federal Catalog?

   It was assigned 18 years ago, on Fri, May 23, 2008