NSN 67105940

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode inductance rating, unable to decode frequency rating, unable to decode coil form type, open inclosure type, humidity resistant and vibration resistant hazardous locations/environmental protection.

NSN 5950-01-331-2835 Datasheet

(NSN) National Stock Number

5950-01-331-2835

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-331-2835

Requires Demilitarization

Yes

(INC) Item Name Code

00777

Date

Sat, Dec 15, 1990

Schedule B Code

8548900100

Coil Form Type

unable to decode

Frequency Rating

unable to decode

Hazardous Locations/Environmental Protection

humidity resistant and vibration resistant

Inductance Rating

unable to decode

Inclosure Type

open

Maximum Operating Temp

100.0 celsius

Mounting Facility Quantity

unable to decode

Mounting Hole Diameter

unable to decode

Mounting Method

Overall Diameter

0.630 inches maximum

Overall Length

0.708 inches maximum

Rating Method

Rating Method

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

6 pin

Test Data Document

27963-13211554 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Turn Quantity

unable to decode

Winding Conductor Size

unable to decode

Winding Function And Quantity

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000777

Cross Reference

CAGE Codes

27963

General Dynamics Information Systems Inc. Dba General Dynamics Advanced Information Systems

U.s./canadian manufacturers

90095

Inrcore, Llc Div Inrcore

U.s./canadian manufacturers

80023

Vishay Hirel Systems Llc Div Marshall

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-01-331-2835?

   The FSCG of the NSN 5950-01-331-2835 is 5950

2. Does the NSN 5950-01-331-2835 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-01-331-2835 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-331-2835 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-01-331-2835 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-331-2835 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Sat, Dec 15, 1990