NSN 672040

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

4.283 cubic inches cubic measure, continuous duty type, unable to decode center to center distance between mounting facilities parallel to width, 1 coil quantity, unable to decode center to center distance between mounting facilities parallel to length.

NSN 5945-00-419-7598 Datasheet

(NSN) National Stock Number

5945-00-419-7598

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

00-419-7598

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Wed, Dec 2, 1970

Schedule B Code

8536490075

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Coil Quantity

1

Cubic Measure

4.283 cubic inches

Duty Type

continuous

Fragility Factor

moderately rugged

Main Contact Load Current Rating At Maximum Rated Voltage

Main Contact Maximum Voltage Rating In Volts

115.0 ac and 24.0 dc

Mounting Facility Pattern

unable to decode

Mounting Facility Type And Quantity

4 threaded hole(s) single mounting facility

Nominal Operating Current Rating And Type

unable to decode

Nominal Thread Size

unable to decode

Nonpile-Up Main Contact Arrangement

2 pole, double throw, one position momentary

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

1.875 inches nominal

Overall Length

1.625 inches nominal

Overall Width

1.406 inches nominal

Terminal Type And Quantity

unable to decode

Thread Class

unable to decode

Thread Direction

unable to decode

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Winding Dc Resistance Rating

unable to decode

Winding Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

02288

Allied Controls, Inc.

U.s./canadian manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

06KW9

Lucent Technologies Inc Dba Federal Marketing Group

U.s./canadian manufacturers

3B4M0

Lucent Technologies Inc Corporate Headquarters

Non-manufacturers

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-49-0075

Description

relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5945-00-419-7598?

   The FSCG of the NSN 5945-00-419-7598 is 5945

2. Does the NSN 5945-00-419-7598 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536490075

3. Does NSN 5945-00-419-7598 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-00-419-7598 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5945-00-419-7598 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-00-419-7598 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Wed, Dec 2, 1970