NATO Stock Number
5925-00-102-7825
Sold in multiples of
1 EA
DEMIL
NO
Body Style
Multipole-single actuator type
Bushing Length
Between 0.235 inches and 0.250 inches
Body Length
2.250 inches
Body Width
2.189 inches
Body Height
Between 2.340 inches and 2.400 inches
Case Material
Plastic
Center To Center Distance Between Terminals Parallel To Length
Between 1.161 inches and 1.220 inches
Center To Center Distance Between Terminals Parallel To Width
Between 0.720 inches and 0.780 inches
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
Between 1.470 inches and 1.530 inches
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
Between 0.720 inches and 0.780 inches
Fragility Factor
Moderately rugged
Pole Quantity
3
Mounting Facility Type And Quantity
6 threaded hole
Storage Type
General purpose warehouse
Thready Qty Per Inch (tpi)
32
Maximum Continuous Load Current Rating Per Pole
25.0 amperes ac all locations
Operating Voltage Type And Rating Per Pole In Volts
120.0 ac all locations
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
6000.0 ac all locations
Circuit Protection Type
Overcurrent all locations
Trip Release Method
Thermal all locations
Trip Release Characteristic
Time delay all locations
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
138.0 all locations
Reset Method
Manual
Main Contact Tripping Mechanism Type
Trip free
Manual Actuator Type And Quantity
1 push-pull
Actuator Function
Trip-reset
Actuator Position Designation
At pole two
Internal Trip Release Configuration
Series trip all locations
Thread Size
0.138 inches
Trip Delay Time In Seconds Per Rated Continuous Current
15.000 at 200 pct all locations and 65.000 at 200 pct all locations
Inclosure Protection Type For Which Designed
General purpose
Trip Release Ambient Tempurature Rating
25.0 degrees celsius all locations
Frequency In Hertz
400.0 all locations
Unpackaged Unit Weight
3.250 ounces
Test Data Document
98897-stsvc004 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Thread Series Designator
Unc
Terminal Type And Quantity
6 tab w/screw