NSN 676399

0.591 inches minimum and 0.617 inches maximum center section height, 0.056 inches minimum and 0.062 inches maximum center section thickness, machined fabrication method, 119.0 degrees nominal first leg angle, 0.485 inches minimum and 0.515 inches maximum center section width.

NSN 5340-00-192-4136 Datasheet

(NSN) National Stock Number

5340-00-192-4136

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-192-4136

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Fri, Mar 20, 1970

Center Section Height

0.591 inches minimum and 0.617 inches maximum

Center Section Thickness

0.056 inches minimum and 0.062 inches maximum

Center Section Width

0.485 inches minimum and 0.515 inches maximum

Fabrication Method

machined

First Leg Angle

119.0 degrees nominal

First Leg Distance From Edge To Hole Center Along Width

0.240 inches minimum and 0.260 inches maximum

First Leg End Radius

0.344 inches minimum and 0.406 inches maximum

First Leg Hole Arrangement Style

one hole

First Leg Hole Diameter

0.214 inches minimum and 0.224 inches maximum

First Leg Distance From Edge To Hole Center Along Length

0.240 inches minimum and 0.260 inches maximum

First Leg Style

end radius

First Leg Thickness

0.056 inches minimum and 0.062 inches maximum

First Leg Width

0.485 inches minimum and 0.515 inches maximum

First Leg Length

0.630 inches minimum and 0.670 inches maximum

Material Document And Classification

ams 5504 assn std single material response

Material

steel comp 410

Second Leg Angle

119.0 degrees nominal

Second Leg End Radius

0.344 inches minimum and 0.406 inches maximum

Second Leg Hole Arrangement Style

one hole

Second Leg Hole Diameter

0.214 inches minimum and 0.224 inches maximum

Second Leg Length

0.630 inches minimum and 0.670 inches maximum

Second Leg Distance From Edge To Hole Center Along Length

0.240 inches minimum and 0.260 inches maximum

Second Leg Distance From Edge To Hole Center Along Width

0.240 inches minimum and 0.260 inches maximum

Second Leg Width

0.485 inches minimum and 0.515 inches maximum

Second Leg Relationship To First Leg

not identical

Second Leg Style

end radius

Second Leg Thickness

0.056 inches minimum and 0.062 inches maximum

Style Designator

double angle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

77445

Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney

Non-manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-00-192-4136?

   The FSCG of the NSN 5340-00-192-4136 is 5340

2. Does NSN 5340-00-192-4136 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-192-4136 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-192-4136 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-192-4136 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Fri, Mar 20, 1970