NSN 6770079

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.550 inches maximum body height, without mounting facilities, terminal(s) on one surface body style, solid anode type, 0.550 inches maximum body width, 1.100 inches nominal body length.

NSN 5910-01-378-7894 Datasheet

(NSN) National Stock Number

5910-01-378-7894

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-378-7894

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Sat, Aug 21, 1993

Schedule B Code

8532290040

Anode Type

solid

Body Height

0.550 inches maximum

Body Length

1.100 inches nominal

Body Style

without mounting facilities, terminal(s) on one surface

Body Width

0.550 inches maximum

Capacitance Value Per Section

1000000.000 microfarads single section

Capacitive Electrode Material

tantalum

Center To Center Distance Between Terminals Parallel To Length

0.400 inches nominal

Electrical Polarization

nonpolarized

Equivalent Series Resistance At Reference Temp In Ohms

7.00

Material

ceramic case

Nonderated Operating Temp

-25.0 celsius minimum and 70.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

5.5 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-20.00 to 80.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

72819

Ohmite Holding, L.l.c.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-378-7894?

   The FSCG of the NSN 5910-01-378-7894 is 5910

2. Does the NSN 5910-01-378-7894 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-378-7894 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-378-7894 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-378-7894 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-378-7894 was assigned to the Federal Catalog?

   It was assigned 33 years ago, on Sat, Aug 21, 1993