NSN 67Z4-108

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

2.250 inches nominal body length, external actuation point screw contact adjustment type, increase contact action stimulus, deactuation point not adjustable and actuation point adjustable contact adjustability, +0.40 to 1.60 actuation point degrees fahrenheit contact adjustment range.

NSN 5930-01-042-7630 Datasheet

(NSN) National Stock Number

5930-01-042-7630

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-042-7630

Requires Demilitarization

Yes

(INC) Item Name Code

00206

Date

Tue, Jun 14, 1977

Schedule B Code

8536509065

Body Length

2.250 inches nominal

Contact Action Stimulus

increase

Contact Adjustability

deactuation point not adjustable and actuation point adjustable

Contact Adjustment Range

+0.40 to 1.60 actuation point degrees fahrenheit

Contact Adjustment Type

external actuation point screw

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

1.00 differential point nominal degrees fahrenheit

Contact Voltage Rating In Volts

unable to decode

Distance Between Mounting Facility Centers

4.187 inches nominal

Features Provided

electrical access port

Frequency In Hertz

unable to decode

Inside Diameter

unable to decode

Media For Which Designed

gas or liquid

Mounting Facility Pattern

two position in-line

Mounting Method

unthreaded hole(s)

Nominal Thread Size

unable to decode

Nonpile-Up Contact Arrangement

1 pole, double throw, both positions maintained

Operating Temp Rating

-32.0 fahrenheit minimum and 130.0 fahrenheit maximum

Overall Diameter

3.500 inches nominal

Overall Length

2.500 inches nominal

Pressure Connector Type

unable to decode

Pressure Switch Type

differential

Proof Pressure

45.00 inches of water

Style Designator

cylindrical

Terminal Type

screw

Thread Class

unable to decode

Thread Length

unable to decode

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Unthreaded Mounting Hole Diameter

0.187 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000206

Cross Reference

CAGE Codes

60674

Microwave Devices Inc

U.s./canadian manufacturers

85274

Dwyer Instruments Inc

U.s./canadian manufacturers

98437

Ellis & Watts International, Llc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-042-7630?

   The FSCG of the NSN 5930-01-042-7630 is 5930

2. Does the NSN 5930-01-042-7630 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-042-7630 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-042-7630 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-042-7630 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-042-7630 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Tue, Jun 14, 1977