NSN 6861553

machined fabrication method, 3.025 inches nominal center section width, 0.300 inches nominal first leg corner radius, 0.052 inches minimum and 0.069 inches maximum center section thickness, 2.283 inches nominal center section height.

NSN 5340-00-709-8597 Datasheet

(NSN) National Stock Number

5340-00-709-8597

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-709-8597

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Wed, Feb 7, 1968

Center Section Height

2.283 inches nominal

Center Section Thickness

0.052 inches minimum and 0.069 inches maximum

Center Section Width

3.025 inches nominal

Fabrication Method

machined

First Leg Corner Radius

0.300 inches nominal

First Leg Distance From Edge To Hole Center Along Width

0.300 inches nominal

First Leg Hole Arrangement Style

two holes

First Leg Hole Diameter

0.278 inches minimum and 0.291 inches maximum

First Leg Distance Between Hole Centers Along Width

2.425 inches nominal

First Leg Distance From Edge To Hole Center Along Length

0.300 inches nominal

First Leg Style

corner radius

First Leg Thickness

0.052 inches minimum and 0.069 inches maximum

First Leg Width

3.025 inches nominal

First Leg Length

0.680 inches nominal

First Leg Offset Angle

135.0 degrees nominal

Material Document And Classification

ams 5504 assn std single material response

Material

steel comp 410

Second Leg Angle

135.0 degrees nominal

Second Leg Corner Radius

0.250 inches nominal

Second Leg Distance Between Hole Centers Along Length

0.420 inches nominal

Second Leg Distance Between Hole Centers Along Width

1.976 inches nominal

Second Leg Hole Arrangement Style

two holes

Second Leg Hole Diameter

0.278 inches minimum and 0.291 inches maximum

Second Leg Length

1.050 inches nominal

Second Leg Distance From Edge To Hole Center Along Length

0.250 inches nominal

Second Leg Distance From Edge To Hole Center Along Width

0.250 inches nominal

Second Leg Width

2.476 inches nominal

Second Leg Offset Angle

135.0 degrees nominal

Second Leg Relationship To First Leg

not identical

Second Leg Style

corner radius

Second Leg Thickness

0.052 inches minimum and 0.069 inches maximum

Style Designator

offset double angle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

73342

Allison Transmission Inc Dba Allison Transmission, Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-00-709-8597?

   The FSCG of the NSN 5340-00-709-8597 is 5340

2. Does NSN 5340-00-709-8597 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-709-8597 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-709-8597 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-709-8597 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Wed, Feb 7, 1968