NATO Stock Number
5925-00-179-8267
Sold in multiples of
1 EA
DEMIL
NO
Body Style
Single pole type
Bushing Length
Between 0.240 inches and 0.260 inches
Body Length
Between 0.719 inches and 0.781 inches
Body Width
Between 0.531 inches and 0.593 inches
Case Material
Plastic
Center To Center Distance Between Terminals Parallel To Length
Between 0.696 inches and 0.716 inches
Fragility Factor
Moderately rugged
Mounting Surface To Terminal End Distance
Between 1.208 inches and 1.228 inches
Pole Quantity
1
Mounting Facility Type And Quantity
1 threaded bushing
Storage Type
General purpose warehouse
Thready Qty Per Inch (tpi)
32
Maximum Continuous Load Current Rating Per Pole
7.5 amperes ac single location and 7.5 amperes dc single location
Operating Voltage Type And Rating Per Pole In Volts
120.0 ac single location and 30.0 dc single location
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
2500.0 ac single location and 6000.0 dc single location
Circuit Protection Type
Overcurrent single location
Trip Release Method
Thermal single location
Trip Release Characteristic
Time delay single location
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
150.0 single location
Reset Method
Manual
Main Contact Tripping Mechanism Type
Trip free
Manual Actuator Type And Quantity
1 push-pull
Actuator Function
Trip-reset
Actuator Position Designation
At pole one
Internal Trip Release Configuration
Series trip single location
Thread Size
0.469 inches
Trip Delay Time In Seconds Per Rated Continuous Current
4.000 at 200 pct single location and 16.000 at 200 pct single location
Inclosure Protection Type For Which Designed
Fungus resistant and moisture resistant
Trip Release Ambient Tempurature Rating
25.0 degrees celsius single location
Frequency In Hertz
400.0 single location
Unpackaged Unit Weight
1.000 ounces
Test Data Document
97151-68c40029 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Thread Series Designator
Uns
Terminal Type And Quantity
2 tab w/screw